Contract 0xda76e44775c441ef53b9c769d175fb2948f15e1c

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

import {ICollectModule} from '../../../interfaces/ICollectModule.sol';
import {Errors} from '../../../libraries/Errors.sol';
import {FeeModuleBase} from '../FeeModuleBase.sol';
import {ModuleBase} from '../ModuleBase.sol';
import {FollowValidationModuleBase} from '../FollowValidationModuleBase.sol';
import {IERC20} from '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import {SafeERC20} from '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';
import {IERC721} from '@openzeppelin/contracts/token/ERC721/IERC721.sol';

/**
 * @notice A struct containing the necessary data to execute collect actions on a publication.
 *
 * @param collectLimit The maximum number of collects for this publication.
 * @param currentCollects The current number of collects for this publication.
 * @param amount The collecting cost associated with this publication.
 * @param currency The currency associated with this publication.
 * @param recipient The recipient address associated with this publication.
 * @param referralFee The referral fee associated with this publication.
 * @param endTimestamp The end timestamp after which collecting is impossible.
 * @param followerOnly Whether only followers should be able to collect.
 */
struct ProfilePublicationData {
    uint256 collectLimit;
    uint256 currentCollects;
    uint256 amount;
    address currency;
    address recipient;
    uint16 referralFee;
    bool followerOnly;
    uint40 endTimestamp;
}

/**
 * @title LimitedTimedFeeCollectModule
 * @author Lens Protocol
 *
 * @notice This is a simple Lens CollectModule implementation, inheriting from the ICollectModule interface and
 * the FeeCollectModuleBase abstract contract. To optimize on gas, this module uses a constant 24 hour maximum
 * collection time.
 *
 * This module works by allowing limited collects for a publication within the allotted time with a given fee.
 */
contract LimitedTimedFeeCollectModule is FeeModuleBase, FollowValidationModuleBase, ICollectModule {
    using SafeERC20 for IERC20;

    uint24 internal constant ONE_DAY = 24 hours;

    mapping(uint256 => mapping(uint256 => ProfilePublicationData))
        internal _dataByPublicationByProfile;

    constructor(address hub, address moduleGlobals) FeeModuleBase(moduleGlobals) ModuleBase(hub) {}

    /**
     * @notice This collect module levies a fee on collects and supports referrals. Thus, we need to decode data.
     *
     * @param profileId The profile ID of the publication to initialize this module for's publishing profile.
     * @param pubId The publication ID of the publication to initialize this module for.
     * @param data The arbitrary data parameter, decoded into:
     *      uint256 collectLimit: The maximum amount of collects.
     *      uint256 amount: The currency total amount to levy.
     *      address currency: The currency address, must be internally whitelisted.
     *      address recipient: The custom recipient address to direct earnings to.
     *      uint16 referralFee: The referral fee to set.
     *      bool followerOnly: Whether only followers should be able to collect.
     *
     * @return bytes An abi encoded bytes parameter, containing (in order): collectLimit, amount, currency, recipient, referral fee & end timestamp.
     */
    function initializePublicationCollectModule(
        uint256 profileId,
        uint256 pubId,
        bytes calldata data
    ) external override onlyHub returns (bytes memory) {
        unchecked {
            uint40 endTimestamp = uint40(block.timestamp) + ONE_DAY;

            (
                uint256 collectLimit,
                uint256 amount,
                address currency,
                address recipient,
                uint16 referralFee,
                bool followerOnly
            ) = abi.decode(data, (uint256, uint256, address, address, uint16, bool));
            if (
                collectLimit == 0 ||
                !_currencyWhitelisted(currency) ||
                recipient == address(0) ||
                referralFee > BPS_MAX ||
                amount == 0
            ) revert Errors.InitParamsInvalid();

            _dataByPublicationByProfile[profileId][pubId].collectLimit = collectLimit;
            _dataByPublicationByProfile[profileId][pubId].amount = amount;
            _dataByPublicationByProfile[profileId][pubId].currency = currency;
            _dataByPublicationByProfile[profileId][pubId].recipient = recipient;
            _dataByPublicationByProfile[profileId][pubId].referralFee = referralFee;
            _dataByPublicationByProfile[profileId][pubId].followerOnly = followerOnly;
            _dataByPublicationByProfile[profileId][pubId].endTimestamp = endTimestamp;

            return
                abi.encode(
                    collectLimit,
                    amount,
                    currency,
                    recipient,
                    referralFee,
                    followerOnly,
                    endTimestamp
                );
        }
    }

    /**
     * @dev Processes a collect by:
     *  1. Ensuring the collector is a follower
     *  2. Ensuring the current timestamp is less than or equal to the collect end timestamp
     *  3. Ensuring the collect does not pass the collect limit
     *  4. Charging a fee
     */
    function processCollect(
        uint256 referrerProfileId,
        address collector,
        uint256 profileId,
        uint256 pubId,
        bytes calldata data
    ) external override onlyHub {
        if (_dataByPublicationByProfile[profileId][pubId].followerOnly)
            _checkFollowValidity(profileId, collector);
        uint256 endTimestamp = _dataByPublicationByProfile[profileId][pubId].endTimestamp;
        if (block.timestamp > endTimestamp) revert Errors.CollectExpired();

        if (
            _dataByPublicationByProfile[profileId][pubId].currentCollects >=
            _dataByPublicationByProfile[profileId][pubId].collectLimit
        ) {
            revert Errors.MintLimitExceeded();
        } else {
            ++_dataByPublicationByProfile[profileId][pubId].currentCollects;
            if (referrerProfileId == profileId) {
                _processCollect(collector, profileId, pubId, data);
            } else {
                _processCollectWithReferral(referrerProfileId, collector, profileId, pubId, data);
            }
        }
    }

    /**
     * @notice Returns the publication data for a given publication, or an empty struct if that publication was not
     * initialized with this module.
     *
     * @param profileId The token ID of the profile mapped to the publication to query.
     * @param pubId The publication ID of the publication to query.
     *
     * @return ProfilepublicationData The ProfilePublicationData struct mapped to that publication.
     */
    function getPublicationData(uint256 profileId, uint256 pubId)
        external
        view
        returns (ProfilePublicationData memory)
    {
        return _dataByPublicationByProfile[profileId][pubId];
    }

    function _processCollect(
        address collector,
        uint256 profileId,
        uint256 pubId,
        bytes calldata data
    ) internal {
        uint256 amount = _dataByPublicationByProfile[profileId][pubId].amount;
        address currency = _dataByPublicationByProfile[profileId][pubId].currency;
        _validateDataIsExpected(data, currency, amount);

        (address treasury, uint16 treasuryFee) = _treasuryData();
        address recipient = _dataByPublicationByProfile[profileId][pubId].recipient;
        uint256 treasuryAmount = (amount * treasuryFee) / BPS_MAX;
        uint256 adjustedAmount = amount - treasuryAmount;

        IERC20(currency).safeTransferFrom(collector, recipient, adjustedAmount);
        if (treasuryAmount > 0)
            IERC20(currency).safeTransferFrom(collector, treasury, treasuryAmount);
    }

    function _processCollectWithReferral(
        uint256 referrerProfileId,
        address collector,
        uint256 profileId,
        uint256 pubId,
        bytes calldata data
    ) internal {
        uint256 amount = _dataByPublicationByProfile[profileId][pubId].amount;
        address currency = _dataByPublicationByProfile[profileId][pubId].currency;
        _validateDataIsExpected(data, currency, amount);

        uint256 referralFee = _dataByPublicationByProfile[profileId][pubId].referralFee;
        address treasury;
        uint256 treasuryAmount;

        // Avoids stack too deep
        {
            uint16 treasuryFee;
            (treasury, treasuryFee) = _treasuryData();
            treasuryAmount = (amount * treasuryFee) / BPS_MAX;
        }

        uint256 adjustedAmount = amount - treasuryAmount;

        if (referralFee != 0) {
            // The reason we levy the referral fee on the adjusted amount is so that referral fees
            // don't bypass the treasury fee, in essence referrals pay their fair share to the treasury.
            uint256 referralAmount = (adjustedAmount * referralFee) / BPS_MAX;
            adjustedAmount = adjustedAmount - referralAmount;

            address referralRecipient = IERC721(HUB).ownerOf(referrerProfileId);

            IERC20(currency).safeTransferFrom(collector, referralRecipient, referralAmount);
        }
        address recipient = _dataByPublicationByProfile[profileId][pubId].recipient;

        IERC20(currency).safeTransferFrom(collector, recipient, adjustedAmount);
        if (treasuryAmount > 0)
            IERC20(currency).safeTransferFrom(collector, treasury, treasuryAmount);
    }
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

/**
 * @title ICollectModule
 * @author Lens Protocol
 *
 * @notice This is the standard interface for all Lens-compatible CollectModules.
 */
interface ICollectModule {
    /**
     * @notice Initializes data for a given publication being published. This can only be called by the hub.
     *
     * @param profileId The token ID of the profile publishing the publication.
     * @param pubId The associated publication's LensHub publication ID.
     * @param data Arbitrary data __passed from the user!__ to be decoded.
     *
     * @return bytes An abi encoded byte array encapsulating the execution's state changes. This will be emitted by the
     * hub alongside the collect module's address and should be consumed by front ends.
     */
    function initializePublicationCollectModule(
        uint256 profileId,
        uint256 pubId,
        bytes calldata data
    ) external returns (bytes memory);

    /**
     * @notice Processes a collect action for a given publication, this can only be called by the hub.
     *
     * @param referrerProfileId The LensHub profile token ID of the referrer's profile (only different in case of mirrors).
     * @param collector The collector address.
     * @param profileId The token ID of the profile associated with the publication being collected.
     * @param pubId The LensHub publication ID associated with the publication being collected.
     * @param data Arbitrary data __passed from the collector!__ to be decoded.
     */
    function processCollect(
        uint256 referrerProfileId,
        address collector,
        uint256 profileId,
        uint256 pubId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

library Errors {
    error CannotInitImplementation();
    error Initialized();
    error SignatureExpired();
    error ZeroSpender();
    error SignatureInvalid();
    error NotOwnerOrApproved();
    error NotHub();
    error TokenDoesNotExist();
    error NotGovernance();
    error NotGovernanceOrEmergencyAdmin();
    error EmergencyAdminCannotUnpause();
    error CallerNotWhitelistedModule();
    error CollectModuleNotWhitelisted();
    error FollowModuleNotWhitelisted();
    error ReferenceModuleNotWhitelisted();
    error ProfileCreatorNotWhitelisted();
    error NotProfileOwner();
    error NotProfileOwnerOrDispatcher();
    error NotDispatcher();
    error PublicationDoesNotExist();
    error HandleTaken();
    error HandleLengthInvalid();
    error HandleContainsInvalidCharacters();
    error ProfileImageURILengthInvalid();
    error CallerNotFollowNFT();
    error CallerNotCollectNFT();
    error BlockNumberInvalid();
    error ArrayMismatch();
    error CannotCommentOnSelf();

    // Module Errors
    error InitParamsInvalid();
    error CollectExpired();
    error FollowInvalid();
    error ModuleDataMismatch();
    error FollowNotApproved();
    error MintLimitExceeded();
    error CollectNotAllowed();

    // MultiState Errors
    error Paused();
    error PublishingPaused();
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

import {Errors} from '../../libraries/Errors.sol';
import {Events} from '../../libraries/Events.sol';
import {IModuleGlobals} from '../../interfaces/IModuleGlobals.sol';

/**
 * @title FeeModuleBase
 * @author Lens Protocol
 *
 * @notice This is an abstract contract to be inherited from by modules that require basic fee functionality. It
 * contains getters for module globals parameters as well as a validation function to check expected data.
 */
abstract contract FeeModuleBase {
    uint16 internal constant BPS_MAX = 10000;

    address public immutable MODULE_GLOBALS;

    constructor(address moduleGlobals) {
        if (moduleGlobals == address(0)) revert Errors.InitParamsInvalid();
        MODULE_GLOBALS = moduleGlobals;
        emit Events.FeeModuleBaseConstructed(moduleGlobals, block.timestamp);
    }

    function _currencyWhitelisted(address currency) internal view returns (bool) {
        return IModuleGlobals(MODULE_GLOBALS).isCurrencyWhitelisted(currency);
    }

    function _treasuryData() internal view returns (address, uint16) {
        return IModuleGlobals(MODULE_GLOBALS).getTreasuryData();
    }

    function _validateDataIsExpected(
        bytes calldata data,
        address currency,
        uint256 amount
    ) internal pure {
        (address decodedCurrency, uint256 decodedAmount) = abi.decode(data, (address, uint256));
        if (decodedAmount != amount || decodedCurrency != currency)
            revert Errors.ModuleDataMismatch();
    }
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

import {Errors} from '../../libraries/Errors.sol';
import {Events} from '../../libraries/Events.sol';

/**
 * @title ModuleBase
 * @author Lens Protocol
 *
 * @notice This abstract contract adds a public `HUB` immutable to inheriting modules, as well as an
 * `onlyHub` modifier.
 */
abstract contract ModuleBase {
    address public immutable HUB;

    modifier onlyHub() {
        if (msg.sender != HUB) revert Errors.NotHub();
        _;
    }

    constructor(address hub) {
        if (hub == address(0)) revert Errors.InitParamsInvalid();
        HUB = hub;
        emit Events.ModuleBaseConstructed(hub, block.timestamp);
    }
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

import {IFollowModule} from '../../interfaces/IFollowModule.sol';
import {ILensHub} from '../../interfaces/ILensHub.sol';
import {Errors} from '../../libraries/Errors.sol';
import {Events} from '../../libraries/Events.sol';
import {ModuleBase} from './ModuleBase.sol';
import {IERC721} from '@openzeppelin/contracts/token/ERC721/IERC721.sol';

/**
 * @title FollowValidationModuleBase
 * @author Lens Protocol
 *
 * @notice This abstract contract adds a simple non-specific follow validation function.
 *
 * NOTE: Both the `HUB` variable and `_checkFollowValidity()` function are exposed to inheriting
 * contracts.
 *
 * NOTE: This is only compatible with COLLECT & REFERENCE MODULES.
 */
abstract contract FollowValidationModuleBase is ModuleBase {
    /**
     * @notice Validates whether a given user is following a given profile.
     *
     * @dev It will revert if the user is not following the profile except the case when the user is the profile owner.
     *
     * @param profileId The ID of the profile that should be followed by the given user.
     * @param user The address of the user that should be following the given profile.
     */
    function _checkFollowValidity(uint256 profileId, address user) internal view {
        address followModule = ILensHub(HUB).getFollowModule(profileId);
        bool isFollowing;
        if (followModule != address(0)) {
            isFollowing = IFollowModule(followModule).isFollowing(profileId, user, 0);
        } else {
            address followNFT = ILensHub(HUB).getFollowNFT(profileId);
            isFollowing = followNFT != address(0) && IERC721(followNFT).balanceOf(user) != 0;
        }
        if (!isFollowing && IERC721(HUB).ownerOf(profileId) != user) {
            revert Errors.FollowInvalid();
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(
        IERC20 token,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) {
            // Return data is optional
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (token/ERC721/IERC721.sol)

pragma solidity ^0.8.0;

import "../../utils/introspection/IERC165.sol";

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
interface IERC721 is IERC165 {
    /**
     * @dev Emitted when `tokenId` token is transferred from `from` to `to`.
     */
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables `approved` to manage the `tokenId` token.
     */
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);

    /**
     * @dev Emitted when `owner` enables or disables (`approved`) `operator` to manage all of its assets.
     */
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of tokens in ``owner``'s account.
     */
    function balanceOf(address owner) external view returns (uint256 balance);

    /**
     * @dev Returns the owner of the `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function ownerOf(uint256 tokenId) external view returns (address owner);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`, checking first that contract recipients
     * are aware of the ERC721 protocol to prevent tokens from being forever locked.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Transfers `tokenId` token from `from` to `to`.
     *
     * WARNING: Usage of this method is discouraged, use {safeTransferFrom} whenever possible.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address from,
        address to,
        uint256 tokenId
    ) external;

    /**
     * @dev Gives permission to `to` to transfer `tokenId` token to another account.
     * The approval is cleared when the token is transferred.
     *
     * Only a single account can be approved at a time, so approving the zero address clears previous approvals.
     *
     * Requirements:
     *
     * - The caller must own the token or be an approved operator.
     * - `tokenId` must exist.
     *
     * Emits an {Approval} event.
     */
    function approve(address to, uint256 tokenId) external;

    /**
     * @dev Returns the account approved for `tokenId` token.
     *
     * Requirements:
     *
     * - `tokenId` must exist.
     */
    function getApproved(uint256 tokenId) external view returns (address operator);

    /**
     * @dev Approve or remove `operator` as an operator for the caller.
     * Operators can call {transferFrom} or {safeTransferFrom} for any token owned by the caller.
     *
     * Requirements:
     *
     * - The `operator` cannot be the caller.
     *
     * Emits an {ApprovalForAll} event.
     */
    function setApprovalForAll(address operator, bool _approved) external;

    /**
     * @dev Returns if the `operator` is allowed to manage all of the assets of `owner`.
     *
     * See {setApprovalForAll}
     */
    function isApprovedForAll(address owner, address operator) external view returns (bool);

    /**
     * @dev Safely transfers `tokenId` token from `from` to `to`.
     *
     * Requirements:
     *
     * - `from` cannot be the zero address.
     * - `to` cannot be the zero address.
     * - `tokenId` token must exist and be owned by `from`.
     * - If the caller is not `from`, it must be approved to move this token by either {approve} or {setApprovalForAll}.
     * - If `to` refers to a smart contract, it must implement {IERC721Receiver-onERC721Received}, which is called upon a safe transfer.
     *
     * Emits a {Transfer} event.
     */
    function safeTransferFrom(
        address from,
        address to,
        uint256 tokenId,
        bytes calldata data
    ) external;
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

import {DataTypes} from './DataTypes.sol';

library Events {
    /**
     * @dev Emitted when the NFT contract's name and symbol are set at initialization.
     *
     * @param name The NFT name set.
     * @param symbol The NFT symbol set.
     * @param timestamp The current block timestamp.
     */
    event BaseInitialized(string name, string symbol, uint256 timestamp);

    /**
     * @dev Emitted when the hub state is set.
     *
     * @param caller The caller who set the state.
     * @param prevState The previous protocol state, an enum of either `Paused`, `PublishingPaused` or `Unpaused`.
     * @param newState The newly set state, an enum of either `Paused`, `PublishingPaused` or `Unpaused`.
     * @param timestamp The current block timestamp.
     */
    event StateSet(
        address indexed caller,
        DataTypes.ProtocolState indexed prevState,
        DataTypes.ProtocolState indexed newState,
        uint256 timestamp
    );

    /**
     * @dev Emitted when the governance address is changed. We emit the caller even though it should be the previous
     * governance address, as we cannot guarantee this will always be the case due to upgradeability.
     *
     * @param caller The caller who set the governance address.
     * @param prevGovernance The previous governance address.
     * @param newGovernance The new governance address set.
     * @param timestamp The current block timestamp.
     */
    event GovernanceSet(
        address indexed caller,
        address indexed prevGovernance,
        address indexed newGovernance,
        uint256 timestamp
    );

    /**
     * @dev Emitted when the emergency admin is changed. We emit the caller even though it should be the previous
     * governance address, as we cannot guarantee this will always be the case due to upgradeability.
     *
     * @param caller The caller who set the emergency admin address.
     * @param oldEmergencyAdmin The previous emergency admin address.
     * @param newEmergencyAdmin The new emergency admin address set.
     * @param timestamp The current block timestamp.
     */
    event EmergencyAdminSet(
        address indexed caller,
        address indexed oldEmergencyAdmin,
        address indexed newEmergencyAdmin,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a profile creator is added to or removed from the whitelist.
     *
     * @param profileCreator The address of the profile creator.
     * @param whitelisted Whether or not the profile creator is being added to the whitelist.
     * @param timestamp The current block timestamp.
     */
    event ProfileCreatorWhitelisted(
        address indexed profileCreator,
        bool indexed whitelisted,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a follow module is added to or removed from the whitelist.
     *
     * @param followModule The address of the follow module.
     * @param whitelisted Whether or not the follow module is being added to the whitelist.
     * @param timestamp The current block timestamp.
     */
    event FollowModuleWhitelisted(
        address indexed followModule,
        bool indexed whitelisted,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a reference module is added to or removed from the whitelist.
     *
     * @param referenceModule The address of the reference module.
     * @param whitelisted Whether or not the reference module is being added to the whitelist.
     * @param timestamp The current block timestamp.
     */
    event ReferenceModuleWhitelisted(
        address indexed referenceModule,
        bool indexed whitelisted,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a collect module is added to or removed from the whitelist.
     *
     * @param collectModule The address of the collect module.
     * @param whitelisted Whether or not the collect module is being added to the whitelist.
     * @param timestamp The current block timestamp.
     */
    event CollectModuleWhitelisted(
        address indexed collectModule,
        bool indexed whitelisted,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a profile is created.
     *
     * @param profileId The newly created profile's token ID.
     * @param creator The profile creator, who created the token with the given profile ID.
     * @param to The address receiving the profile with the given profile ID.
     * @param handle The handle set for the profile.
     * @param imageURI The image uri set for the profile.
     * @param followModule The profile's newly set follow module. This CAN be the zero address.
     * @param followModuleReturnData The data returned from the follow module's initialization. This is abi encoded
     * and totally depends on the follow module chosen.
     * @param followNFTURI The URI set for the profile's follow NFT.
     * @param timestamp The current block timestamp.
     */
    event ProfileCreated(
        uint256 indexed profileId,
        address indexed creator,
        address indexed to,
        string handle,
        string imageURI,
        address followModule,
        bytes followModuleReturnData,
        string followNFTURI,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a a default profile is set for a wallet as its main identity
     *
     * @param wallet The wallet which set or unset its default profile.
     * @param profileId The token ID of the profile being set as default, or zero.
     * @param timestamp The current block timestamp.
     */
    event DefaultProfileSet(address indexed wallet, uint256 indexed profileId, uint256 timestamp);

    /**
     * @dev Emitted when a dispatcher is set for a specific profile.
     *
     * @param profileId The token ID of the profile for which the dispatcher is set.
     * @param dispatcher The dispatcher set for the given profile.
     * @param timestamp The current block timestamp.
     */
    event DispatcherSet(uint256 indexed profileId, address indexed dispatcher, uint256 timestamp);

    /**
     * @dev Emitted when a profile's URI is set.
     *
     * @param profileId The token ID of the profile for which the URI is set.
     * @param imageURI The URI set for the given profile.
     * @param timestamp The current block timestamp.
     */
    event ProfileImageURISet(uint256 indexed profileId, string imageURI, uint256 timestamp);

    /**
     * @dev Emitted when a follow NFT's URI is set.
     *
     * @param profileId The token ID of the profile for which the followNFT URI is set.
     * @param followNFTURI The follow NFT URI set.
     * @param timestamp The current block timestamp.
     */
    event FollowNFTURISet(uint256 indexed profileId, string followNFTURI, uint256 timestamp);

    /**
     * @dev Emitted when a profile's follow module is set.
     *
     * @param profileId The profile's token ID.
     * @param followModule The profile's newly set follow module. This CAN be the zero address.
     * @param followModuleReturnData The data returned from the follow module's initialization. This is abi encoded
     * and totally depends on the follow module chosen.
     * @param timestamp The current block timestamp.
     */
    event FollowModuleSet(
        uint256 indexed profileId,
        address followModule,
        bytes followModuleReturnData,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a "post" is published.
     *
     * @param profileId The profile's token ID.
     * @param pubId The new publication's ID.
     * @param contentURI The URI mapped to this new publication.
     * @param collectModule The collect module mapped to this new publication. This CANNOT be the zero address.
     * @param collectModuleReturnData The data returned from the collect module's initialization for this given
     * publication. This is abi encoded and totally depends on the collect module chosen.
     * @param referenceModule The reference module set for this publication.
     * @param referenceModuleReturnData The data returned from the reference module at initialization. This is abi
     * encoded and totally depends on the reference module chosen.
     * @param timestamp The current block timestamp.
     */
    event PostCreated(
        uint256 indexed profileId,
        uint256 indexed pubId,
        string contentURI,
        address collectModule,
        bytes collectModuleReturnData,
        address referenceModule,
        bytes referenceModuleReturnData,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a "comment" is published.
     *
     * @param profileId The profile's token ID.
     * @param pubId The new publication's ID.
     * @param contentURI The URI mapped to this new publication.
     * @param profileIdPointed The profile token ID that this comment points to.
     * @param pubIdPointed The publication ID that this comment points to.
     * @param referenceModuleData The data passed to the reference module.
     * @param collectModule The collect module mapped to this new publication. This CANNOT be the zero address.
     * @param collectModuleReturnData The data returned from the collect module's initialization for this given
     * publication. This is abi encoded and totally depends on the collect module chosen.
     * @param referenceModule The reference module set for this publication.
     * @param referenceModuleReturnData The data returned from the reference module at initialization. This is abi
     * encoded and totally depends on the reference module chosen.
     * @param timestamp The current block timestamp.
     */
    event CommentCreated(
        uint256 indexed profileId,
        uint256 indexed pubId,
        string contentURI,
        uint256 profileIdPointed,
        uint256 pubIdPointed,
        bytes referenceModuleData,
        address collectModule,
        bytes collectModuleReturnData,
        address referenceModule,
        bytes referenceModuleReturnData,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a "mirror" is published.
     *
     * @param profileId The profile's token ID.
     * @param pubId The new publication's ID.
     * @param profileIdPointed The profile token ID that this mirror points to.
     * @param pubIdPointed The publication ID that this mirror points to.
     * @param referenceModuleData The data passed to the reference module.
     * @param referenceModule The reference module set for this publication.
     * @param referenceModuleReturnData The data returned from the reference module at initialization. This is abi
     * encoded and totally depends on the reference module chosen.
     * @param timestamp The current block timestamp.
     */
    event MirrorCreated(
        uint256 indexed profileId,
        uint256 indexed pubId,
        uint256 profileIdPointed,
        uint256 pubIdPointed,
        bytes referenceModuleData,
        address referenceModule,
        bytes referenceModuleReturnData,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a followNFT clone is deployed using a lazy deployment pattern.
     *
     * @param profileId The token ID of the profile to which this followNFT is associated.
     * @param followNFT The address of the newly deployed followNFT clone.
     * @param timestamp The current block timestamp.
     */
    event FollowNFTDeployed(
        uint256 indexed profileId,
        address indexed followNFT,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a collectNFT clone is deployed using a lazy deployment pattern.
     *
     * @param profileId The publisher's profile token ID.
     * @param pubId The publication associated with the newly deployed collectNFT clone's ID.
     * @param collectNFT The address of the newly deployed collectNFT clone.
     * @param timestamp The current block timestamp.
     */
    event CollectNFTDeployed(
        uint256 indexed profileId,
        uint256 indexed pubId,
        address indexed collectNFT,
        uint256 timestamp
    );

    /**
     * @dev Emitted upon a successful collect action.
     *
     * @param collector The address collecting the publication.
     * @param profileId The token ID of the profile that the collect was initiated towards, useful to differentiate mirrors.
     * @param pubId The publication ID that the collect was initiated towards, useful to differentiate mirrors.
     * @param rootProfileId The profile token ID of the profile whose publication is being collected.
     * @param rootPubId The publication ID of the publication being collected.
     * @param collectModuleData The data passed to the collect module.
     * @param timestamp The current block timestamp.
     */
    event Collected(
        address indexed collector,
        uint256 indexed profileId,
        uint256 indexed pubId,
        uint256 rootProfileId,
        uint256 rootPubId,
        bytes collectModuleData,
        uint256 timestamp
    );

    /**
     * @dev Emitted upon a successful follow action.
     *
     * @param follower The address following the given profiles.
     * @param profileIds The token ID array of the profiles being followed.
     * @param followModuleDatas The array of data parameters passed to each follow module.
     * @param timestamp The current block timestamp.
     */
    event Followed(
        address indexed follower,
        uint256[] profileIds,
        bytes[] followModuleDatas,
        uint256 timestamp
    );

    /**
     * @dev Emitted via callback when a followNFT is transferred.
     *
     * @param profileId The token ID of the profile associated with the followNFT being transferred.
     * @param followNFTId The followNFT being transferred's token ID.
     * @param from The address the followNFT is being transferred from.
     * @param to The address the followNFT is being transferred to.
     * @param timestamp The current block timestamp.
     */
    event FollowNFTTransferred(
        uint256 indexed profileId,
        uint256 indexed followNFTId,
        address from,
        address to,
        uint256 timestamp
    );

    /**
     * @dev Emitted via callback when a collectNFT is transferred.
     *
     * @param profileId The token ID of the profile associated with the collectNFT being transferred.
     * @param pubId The publication ID associated with the collectNFT being transferred.
     * @param collectNFTId The collectNFT being transferred's token ID.
     * @param from The address the collectNFT is being transferred from.
     * @param to The address the collectNFT is being transferred to.
     * @param timestamp The current block timestamp.
     */
    event CollectNFTTransferred(
        uint256 indexed profileId,
        uint256 indexed pubId,
        uint256 indexed collectNFTId,
        address from,
        address to,
        uint256 timestamp
    );

    // Collect/Follow NFT-Specific

    /**
     * @dev Emitted when a newly deployed follow NFT is initialized.
     *
     * @param profileId The token ID of the profile connected to this follow NFT.
     * @param timestamp The current block timestamp.
     */
    event FollowNFTInitialized(uint256 indexed profileId, uint256 timestamp);

    /**
     * @dev Emitted when delegation power in a FollowNFT is changed.
     *
     * @param delegate The delegate whose power has been changed.
     * @param newPower The new governance power mapped to the delegate.
     * @param timestamp The current block timestamp.
     */
    event FollowNFTDelegatedPowerChanged(
        address indexed delegate,
        uint256 indexed newPower,
        uint256 timestamp
    );

    /**
     * @dev Emitted when a newly deployed collect NFT is initialized.
     *
     * @param profileId The token ID of the profile connected to the publication mapped to this collect NFT.
     * @param pubId The publication ID connected to the publication mapped to this collect NFT.
     * @param timestamp The current block timestamp.
     */
    event CollectNFTInitialized(
        uint256 indexed profileId,
        uint256 indexed pubId,
        uint256 timestamp
    );

    // Module-Specific

    /**
     * @notice Emitted when the ModuleGlobals governance address is set.
     *
     * @param prevGovernance The previous governance address.
     * @param newGovernance The new governance address set.
     * @param timestamp The current block timestamp.
     */
    event ModuleGlobalsGovernanceSet(
        address indexed prevGovernance,
        address indexed newGovernance,
        uint256 timestamp
    );

    /**
     * @notice Emitted when the ModuleGlobals treasury address is set.
     *
     * @param prevTreasury The previous treasury address.
     * @param newTreasury The new treasury address set.
     * @param timestamp The current block timestamp.
     */
    event ModuleGlobalsTreasurySet(
        address indexed prevTreasury,
        address indexed newTreasury,
        uint256 timestamp
    );

    /**
     * @notice Emitted when the ModuleGlobals treasury fee is set.
     *
     * @param prevTreasuryFee The previous treasury fee in BPS.
     * @param newTreasuryFee The new treasury fee in BPS.
     * @param timestamp The current block timestamp.
     */
    event ModuleGlobalsTreasuryFeeSet(
        uint16 indexed prevTreasuryFee,
        uint16 indexed newTreasuryFee,
        uint256 timestamp
    );

    /**
     * @notice Emitted when a currency is added to or removed from the ModuleGlobals whitelist.
     *
     * @param currency The currency address.
     * @param prevWhitelisted Whether or not the currency was previously whitelisted.
     * @param whitelisted Whether or not the currency is whitelisted.
     * @param timestamp The current block timestamp.
     */
    event ModuleGlobalsCurrencyWhitelisted(
        address indexed currency,
        bool indexed prevWhitelisted,
        bool indexed whitelisted,
        uint256 timestamp
    );

    /**
     * @notice Emitted when a module inheriting from the `FeeModuleBase` is constructed.
     *
     * @param moduleGlobals The ModuleGlobals contract address used.
     * @param timestamp The current block timestamp.
     */
    event FeeModuleBaseConstructed(address indexed moduleGlobals, uint256 timestamp);

    /**
     * @notice Emitted when a module inheriting from the `ModuleBase` is constructed.
     *
     * @param hub The LensHub contract address used.
     * @param timestamp The current block timestamp.
     */
    event ModuleBaseConstructed(address indexed hub, uint256 timestamp);

    /**
     * @notice Emitted when one or multiple addresses are approved (or disapproved) for following in
     * the `ApprovalFollowModule`.
     *
     * @param owner The profile owner who executed the approval.
     * @param profileId The profile ID that the follow approvals are granted/revoked for.
     * @param addresses The addresses that have had the follow approvals grnated/revoked.
     * @param approved Whether each corresponding address is now approved or disapproved.
     * @param timestamp The current block timestamp.
     */
    event FollowsApproved(
        address indexed owner,
        uint256 indexed profileId,
        address[] addresses,
        bool[] approved,
        uint256 timestamp
    );

    /**
     * @dev Emitted when the user wants to enable or disable follows in the `LensPeriphery`.
     *
     * @param owner The profile owner who executed the toggle.
     * @param profileIds The array of token IDs of the profiles each followNFT is associated with.
     * @param enabled The array of whether each FollowNFT's follow is enabled/disabled.
     * @param timestamp The current block timestamp.
     */
    event FollowsToggled(
        address indexed owner,
        uint256[] profileIds,
        bool[] enabled,
        uint256 timestamp
    );

    /**
     * @dev Emitted when the metadata associated with a profile is set in the `LensPeriphery`.
     *
     * @param profileId The profile ID the metadata is set for.
     * @param metadata The metadata set for the profile and user.
     * @param timestamp The current block timestamp.
     */
    event ProfileMetadataSet(
        uint256 indexed profileId,
        string metadata,
        uint256 timestamp
    );
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

/**
 * @title IModuleGlobals
 * @author Lens Protocol
 *
 * @notice This is the interface for the ModuleGlobals contract, a data providing contract to be queried by modules
 * for the most up-to-date parameters.
 */
interface IModuleGlobals {
    /**
     * @notice Sets the governance address. This function can only be called by governance.
     *
     * @param newGovernance The new governance address to set.
     */
    function setGovernance(address newGovernance) external;

    /**
     * @notice Sets the treasury address. This function can only be called by governance.
     *
     * @param newTreasury The new treasury address to set.
     */
    function setTreasury(address newTreasury) external;

    /**
     * @notice Sets the treasury fee. This function can only be called by governance.
     *
     * @param newTreasuryFee The new treasury fee to set.
     */
    function setTreasuryFee(uint16 newTreasuryFee) external;

    /**
     * @notice Adds or removes a currency from the whitelist. This function can only be called by governance.
     *
     * @param currency The currency to add or remove from the whitelist.
     * @param toWhitelist Whether to add or remove the currency from the whitelist.
     */
    function whitelistCurrency(address currency, bool toWhitelist) external;

    /// ************************
    /// *****VIEW FUNCTIONS*****
    /// ************************

    /**
     * @notice Returns whether a currency is whitelisted.
     *
     * @param currency The currency to query the whitelist for.
     *
     * @return bool True if the queried currency is whitelisted, false otherwise.
     */
    function isCurrencyWhitelisted(address currency) external view returns (bool);

    /**
     * @notice Returns the governance address.
     *
     * @return address The governance address.
     */
    function getGovernance() external view returns (address);

    /**
     * @notice Returns the treasury address.
     *
     * @return address The treasury address.
     */
    function getTreasury() external view returns (address);

    /**
     * @notice Returns the treasury fee.
     *
     * @return uint16 The treasury fee.
     */
    function getTreasuryFee() external view returns (uint16);

    /**
     * @notice Returns the treasury address and treasury fee in a single call.
     *
     * @return tuplee First, the treasury address, second, the treasury fee.
     */
    function getTreasuryData() external view returns (address, uint16);
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

/**
 * @title DataTypes
 * @author Lens Protocol
 *
 * @notice A standard library of data types used throughout the Lens Protocol.
 */
library DataTypes {
    /**
     * @notice An enum containing the different states the protocol can be in, limiting certain actions.
     *
     * @param Unpaused The fully unpaused state.
     * @param PublishingPaused The state where only publication creation functions are paused.
     * @param Paused The fully paused state.
     */
    enum ProtocolState {
        Unpaused,
        PublishingPaused,
        Paused
    }

    /**
     * @notice An enum specifically used in a helper function to easily retrieve the publication type for integrations.
     *
     * @param Post A standard post, having a URI, a collect module but no pointer to another publication.
     * @param Comment A comment, having a URI, a collect module and a pointer to another publication.
     * @param Mirror A mirror, having a pointer to another publication, but no URI or collect module.
     * @param Nonexistent An indicator showing the queried publication does not exist.
     */
    enum PubType {
        Post,
        Comment,
        Mirror,
        Nonexistent
    }

    /**
     * @notice A struct containing the necessary information to reconstruct an EIP-712 typed data signature.
     *
     * @param v The signature's recovery parameter.
     * @param r The signature's r parameter.
     * @param s The signature's s parameter
     * @param deadline The signature's deadline
     */
    struct EIP712Signature {
        uint8 v;
        bytes32 r;
        bytes32 s;
        uint256 deadline;
    }

    /**
     * @notice A struct containing profile data.
     *
     * @param pubCount The number of publications made to this profile.
     * @param followModule The address of the current follow module in use by this profile, can be empty.
     * @param followNFT The address of the followNFT associated with this profile, can be empty..
     * @param handle The profile's associated handle.
     * @param imageURI The URI to be used for the profile's image.
     * @param followNFTURI The URI to be used for the follow NFT.
     */
    struct ProfileStruct {
        uint256 pubCount;
        address followModule;
        address followNFT;
        string handle;
        string imageURI;
        string followNFTURI;
    }

    /**
     * @notice A struct containing data associated with each new publication.
     *
     * @param profileIdPointed The profile token ID this publication points to, for mirrors and comments.
     * @param pubIdPointed The publication ID this publication points to, for mirrors and comments.
     * @param contentURI The URI associated with this publication.
     * @param referenceModule The address of the current reference module in use by this profile, can be empty.
     * @param collectModule The address of the collect module associated with this publication, this exists for all publication.
     * @param collectNFT The address of the collectNFT associated with this publication, if any.
     */
    struct PublicationStruct {
        uint256 profileIdPointed;
        uint256 pubIdPointed;
        string contentURI;
        address referenceModule;
        address collectModule;
        address collectNFT;
    }

    /**
     * @notice A struct containing the parameters required for the `createProfile()` function.
     *
     * @param to The address receiving the profile.
     * @param handle The handle to set for the profile, must be unique and non-empty.
     * @param imageURI The URI to set for the profile image.
     * @param followModule The follow module to use, can be the zero address.
     * @param followModuleInitData The follow module initialization data, if any.
     * @param followNFTURI The URI to use for the follow NFT.
     */
    struct CreateProfileData {
        address to;
        string handle;
        string imageURI;
        address followModule;
        bytes followModuleInitData;
        string followNFTURI;
    }

    /**
     * @notice A struct containing the parameters required for the `setDefaultProfileWithSig()` function. Parameters are
     * the same as the regular `setDefaultProfile()` function, with an added EIP712Signature.
     *
     * @param wallet The address of the wallet setting the default profile.
     * @param profileId The token ID of the profile which will be set as default, or zero.
     * @param sig The EIP712Signature struct containing the profile owner's signature.
     */
    struct SetDefaultProfileWithSigData {
        address wallet;
        uint256 profileId;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `setFollowModuleWithSig()` function. Parameters are
     * the same as the regular `setFollowModule()` function, with an added EIP712Signature.
     *
     * @param profileId The token ID of the profile to change the followModule for.
     * @param followModule The followModule to set for the given profile, must be whitelisted.
     * @param followModuleInitData The data to be passed to the followModule for initialization.
     * @param sig The EIP712Signature struct containing the profile owner's signature.
     */
    struct SetFollowModuleWithSigData {
        uint256 profileId;
        address followModule;
        bytes followModuleInitData;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `setDispatcherWithSig()` function. Parameters are the same
     * as the regular `setDispatcher()` function, with an added EIP712Signature.
     *
     * @param profileId The token ID of the profile to set the dispatcher for.
     * @param dispatcher The dispatcher address to set for the profile.
     * @param sig The EIP712Signature struct containing the profile owner's signature.
     */
    struct SetDispatcherWithSigData {
        uint256 profileId;
        address dispatcher;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `setProfileImageURIWithSig()` function. Parameters are the same
     * as the regular `setProfileImageURI()` function, with an added EIP712Signature.
     *
     * @param profileId The token ID of the profile to set the URI for.
     * @param imageURI The URI to set for the given profile image.
     * @param sig The EIP712Signature struct containing the profile owner's signature.
     */
    struct SetProfileImageURIWithSigData {
        uint256 profileId;
        string imageURI;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `setFollowNFTURIWithSig()` function. Parameters are the same
     * as the regular `setFollowNFTURI()` function, with an added EIP712Signature.
     *
     * @param profileId The token ID of the profile for which to set the followNFT URI.
     * @param followNFTURI The follow NFT URI to set.
     * @param sig The EIP712Signature struct containing the followNFT's associated profile owner's signature.
     */
    struct SetFollowNFTURIWithSigData {
        uint256 profileId;
        string followNFTURI;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `post()` function.
     *
     * @param profileId The token ID of the profile to publish to.
     * @param contentURI The URI to set for this new publication.
     * @param collectModule The collect module to set for this new publication.
     * @param collectModuleInitData The data to pass to the collect module's initialization.
     * @param referenceModule The reference module to set for the given publication, must be whitelisted.
     * @param referenceModuleInitData The data to be passed to the reference module for initialization.
     */
    struct PostData {
        uint256 profileId;
        string contentURI;
        address collectModule;
        bytes collectModuleInitData;
        address referenceModule;
        bytes referenceModuleInitData;
    }

    /**
     * @notice A struct containing the parameters required for the `postWithSig()` function. Parameters are the same as
     * the regular `post()` function, with an added EIP712Signature.
     *
     * @param profileId The token ID of the profile to publish to.
     * @param contentURI The URI to set for this new publication.
     * @param collectModule The collectModule to set for this new publication.
     * @param collectModuleInitData The data to pass to the collectModule's initialization.
     * @param referenceModule The reference module to set for the given publication, must be whitelisted.
     * @param referenceModuleInitData The data to be passed to the reference module for initialization.
     * @param sig The EIP712Signature struct containing the profile owner's signature.
     */
    struct PostWithSigData {
        uint256 profileId;
        string contentURI;
        address collectModule;
        bytes collectModuleInitData;
        address referenceModule;
        bytes referenceModuleInitData;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `comment()` function.
     *
     * @param profileId The token ID of the profile to publish to.
     * @param contentURI The URI to set for this new publication.
     * @param profileIdPointed The profile token ID to point the comment to.
     * @param pubIdPointed The publication ID to point the comment to.
     * @param referenceModuleData The data passed to the reference module.
     * @param collectModule The collect module to set for this new publication.
     * @param collectModuleInitData The data to pass to the collect module's initialization.
     * @param referenceModule The reference module to set for the given publication, must be whitelisted.
     * @param referenceModuleInitData The data to be passed to the reference module for initialization.
     */
    struct CommentData {
        uint256 profileId;
        string contentURI;
        uint256 profileIdPointed;
        uint256 pubIdPointed;
        bytes referenceModuleData;
        address collectModule;
        bytes collectModuleInitData;
        address referenceModule;
        bytes referenceModuleInitData;
    }

    /**
     * @notice A struct containing the parameters required for the `commentWithSig()` function. Parameters are the same as
     * the regular `comment()` function, with an added EIP712Signature.
     *
     * @param profileId The token ID of the profile to publish to.
     * @param contentURI The URI to set for this new publication.
     * @param profileIdPointed The profile token ID to point the comment to.
     * @param pubIdPointed The publication ID to point the comment to.
     * @param referenceModuleData The data passed to the reference module.
     * @param collectModule The collectModule to set for this new publication.
     * @param collectModuleInitData The data to pass to the collectModule's initialization.
     * @param referenceModule The reference module to set for the given publication, must be whitelisted.
     * @param referenceModuleInitData The data to be passed to the reference module for initialization.
     * @param sig The EIP712Signature struct containing the profile owner's signature.
     */
    struct CommentWithSigData {
        uint256 profileId;
        string contentURI;
        uint256 profileIdPointed;
        uint256 pubIdPointed;
        bytes referenceModuleData;
        address collectModule;
        bytes collectModuleInitData;
        address referenceModule;
        bytes referenceModuleInitData;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `mirror()` function.
     *
     * @param profileId The token ID of the profile to publish to.
     * @param profileIdPointed The profile token ID to point the mirror to.
     * @param pubIdPointed The publication ID to point the mirror to.
     * @param referenceModuleData The data passed to the reference module.
     * @param referenceModule The reference module to set for the given publication, must be whitelisted.
     * @param referenceModuleInitData The data to be passed to the reference module for initialization.
     */
    struct MirrorData {
        uint256 profileId;
        uint256 profileIdPointed;
        uint256 pubIdPointed;
        bytes referenceModuleData;
        address referenceModule;
        bytes referenceModuleInitData;
    }

    /**
     * @notice A struct containing the parameters required for the `mirrorWithSig()` function. Parameters are the same as
     * the regular `mirror()` function, with an added EIP712Signature.
     *
     * @param profileId The token ID of the profile to publish to.
     * @param profileIdPointed The profile token ID to point the mirror to.
     * @param pubIdPointed The publication ID to point the mirror to.
     * @param referenceModuleData The data passed to the reference module.
     * @param referenceModule The reference module to set for the given publication, must be whitelisted.
     * @param referenceModuleInitData The data to be passed to the reference module for initialization.
     * @param sig The EIP712Signature struct containing the profile owner's signature.
     */
    struct MirrorWithSigData {
        uint256 profileId;
        uint256 profileIdPointed;
        uint256 pubIdPointed;
        bytes referenceModuleData;
        address referenceModule;
        bytes referenceModuleInitData;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `followWithSig()` function. Parameters are the same
     * as the regular `follow()` function, with the follower's (signer) address and an EIP712Signature added.
     *
     * @param follower The follower which is the message signer.
     * @param profileIds The array of token IDs of the profiles to follow.
     * @param datas The array of arbitrary data to pass to the followModules if needed.
     * @param sig The EIP712Signature struct containing the follower's signature.
     */
    struct FollowWithSigData {
        address follower;
        uint256[] profileIds;
        bytes[] datas;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `collectWithSig()` function. Parameters are the same as
     * the regular `collect()` function, with the collector's (signer) address and an EIP712Signature added.
     *
     * @param collector The collector which is the message signer.
     * @param profileId The token ID of the profile that published the publication to collect.
     * @param pubId The publication to collect's publication ID.
     * @param data The arbitrary data to pass to the collectModule if needed.
     * @param sig The EIP712Signature struct containing the collector's signature.
     */
    struct CollectWithSigData {
        address collector;
        uint256 profileId;
        uint256 pubId;
        bytes data;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `setProfileMetadataWithSig()` function.
     *
     * @param profileId The profile ID for which to set the metadata.
     * @param metadata The metadata string to set for the profile and user.
     * @param sig The EIP712Signature struct containing the user's signature.
     */
    struct SetProfileMetadataWithSigData {
        uint256 profileId;
        string metadata;
        EIP712Signature sig;
    }

    /**
     * @notice A struct containing the parameters required for the `toggleFollowWithSig()` function.
     *
     * @param follower The follower which is the message signer.
     * @param profileIds The token ID array of the profiles.
     * @param enables The array of booleans to enable/disable follows.
     * @param sig The EIP712Signature struct containing the follower's signature.
     */
    struct ToggleFollowWithSigData {
        address follower;
        uint256[] profileIds;
        bool[] enables;
        EIP712Signature sig;
    }
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

/**
 * @title IFollowModule
 * @author Lens Protocol
 *
 * @notice This is the standard interface for all Lens-compatible FollowModules.
 */
interface IFollowModule {
    /**
     * @notice Initializes a follow module for a given Lens profile. This can only be called by the hub contract.
     *
     * @param profileId The token ID of the profile to initialize this follow module for.
     * @param data Arbitrary data passed by the profile creator.
     *
     * @return bytes The encoded data to emit in the hub.
     */
    function initializeFollowModule(uint256 profileId, bytes calldata data)
        external
        returns (bytes memory);

    /**
     * @notice Processes a given follow, this can only be called from the LensHub contract.
     *
     * @param follower The follower address.
     * @param profileId The token ID of the profile being followed.
     * @param data Arbitrary data passed by the follower.
     */
    function processFollow(
        address follower,
        uint256 profileId,
        bytes calldata data
    ) external;

    /**
     * @notice This is a transfer hook that is called upon follow NFT transfer in `beforeTokenTransfer. This can
     * only be called from the LensHub contract.
     *
     * NOTE: Special care needs to be taken here: It is possible that follow NFTs were issued before this module
     * was initialized if the profile's follow module was previously different. This transfer hook should take this
     * into consideration, especially when the module holds state associated with individual follow NFTs.
     *
     * @param profileId The token ID of the profile associated with the follow NFT being transferred.
     * @param from The address sending the follow NFT.
     * @param to The address receiving the follow NFT.
     * @param followNFTTokenId The token ID of the follow NFT being transferred.
     */
    function followModuleTransferHook(
        uint256 profileId,
        address from,
        address to,
        uint256 followNFTTokenId
    ) external;

    /**
     * @notice This is a helper function that could be used in conjunction with specific collect modules.
     *
     * NOTE: This function IS meant to replace a check on follower NFT ownership.
     *
     * NOTE: It is assumed that not all collect modules are aware of the token ID to pass. In these cases,
     * this should receive a `followNFTTokenId` of 0, which is impossible regardless.
     *
     * One example of a use case for this would be a subscription-based following system:
     *      1. The collect module:
     *          - Decodes a follower NFT token ID from user-passed data.
     *          - Fetches the follow module from the hub.
     *          - Calls `isFollowing` passing the profile ID, follower & follower token ID and checks it returned true.
     *      2. The follow module:
     *          - Validates the subscription status for that given NFT, reverting on an invalid subscription.
     *
     * @param profileId The token ID of the profile to validate the follow for.
     * @param follower The follower address to validate the follow for.
     * @param followNFTTokenId The followNFT token ID to validate the follow for.
     *
     * @return true if the given address is following the given profile ID, false otherwise.
     */
    function isFollowing(
        uint256 profileId,
        address follower,
        uint256 followNFTTokenId
    ) external view returns (bool);
}

// SPDX-License-Identifier: AGPL-3.0-only

pragma solidity 0.8.10;

import {DataTypes} from '../libraries/DataTypes.sol';

/**
 * @title ILensHub
 * @author Lens Protocol
 *
 * @notice This is the interface for the LensHub contract, the main entry point for the Lens Protocol.
 * You'll find all the events and external functions, as well as the reasoning behind them here.
 */
interface ILensHub {
    /**
     * @notice Initializes the LensHub NFT, setting the initial governance address as well as the name and symbol in
     * the LensNFTBase contract.
     *
     * @param name The name to set for the hub NFT.
     * @param symbol The symbol to set for the hub NFT.
     * @param newGovernance The governance address to set.
     */
    function initialize(
        string calldata name,
        string calldata symbol,
        address newGovernance
    ) external;

    /**
     * @notice Sets the privileged governance role. This function can only be called by the current governance
     * address.
     *
     * @param newGovernance The new governance address to set.
     */
    function setGovernance(address newGovernance) external;

    /**
     * @notice Sets the emergency admin, which is a permissioned role able to set the protocol state. This function
     * can only be called by the governance address.
     *
     * @param newEmergencyAdmin The new emergency admin address to set.
     */
    function setEmergencyAdmin(address newEmergencyAdmin) external;

    /**
     * @notice Sets the protocol state to either a global pause, a publishing pause or an unpaused state. This function
     * can only be called by the governance address or the emergency admin address.
     *
     * Note that this reverts if the emergency admin calls it if:
     *      1. The emergency admin is attempting to unpause.
     *      2. The emergency admin is calling while the protocol is already paused.
     *
     * @param newState The state to set, as a member of the ProtocolState enum.
     */
    function setState(DataTypes.ProtocolState newState) external;

    /**
     * @notice Adds or removes a profile creator from the whitelist. This function can only be called by the current
     * governance address.
     *
     * @param profileCreator The profile creator address to add or remove from the whitelist.
     * @param whitelist Whether or not the profile creator should be whitelisted.
     */
    function whitelistProfileCreator(address profileCreator, bool whitelist) external;

    /**
     * @notice Adds or removes a follow module from the whitelist. This function can only be called by the current
     * governance address.
     *
     * @param followModule The follow module contract address to add or remove from the whitelist.
     * @param whitelist Whether or not the follow module should be whitelisted.
     */
    function whitelistFollowModule(address followModule, bool whitelist) external;

    /**
     * @notice Adds or removes a reference module from the whitelist. This function can only be called by the current
     * governance address.
     *
     * @param referenceModule The reference module contract to add or remove from the whitelist.
     * @param whitelist Whether or not the reference module should be whitelisted.
     */
    function whitelistReferenceModule(address referenceModule, bool whitelist) external;

    /**
     * @notice Adds or removes a collect module from the whitelist. This function can only be called by the current
     * governance address.
     *
     * @param collectModule The collect module contract address to add or remove from the whitelist.
     * @param whitelist Whether or not the collect module should be whitelisted.
     */
    function whitelistCollectModule(address collectModule, bool whitelist) external;

    /**
     * @notice Creates a profile with the specified parameters, minting a profile NFT to the given recipient. This
     * function must be called by a whitelisted profile creator.
     *
     * @param vars A CreateProfileData struct containing the following params:
     *      to: The address receiving the profile.
     *      handle: The handle to set for the profile, must be unique and non-empty.
     *      imageURI: The URI to set for the profile image.
     *      followModule: The follow module to use, can be the zero address.
     *      followModuleInitData: The follow module initialization data, if any.
     */
    function createProfile(DataTypes.CreateProfileData calldata vars) external returns (uint256);

    /**
     * @notice Sets the mapping between wallet and its main profile identity.
     *
     * @param profileId The token ID of the profile to set as the main profile identity.
     */
    function setDefaultProfile(uint256 profileId) external;

    /**
     * @notice Sets the mapping between wallet and its main profile identity via signature with the specified parameters.
     *
     * @param vars A SetDefaultProfileWithSigData struct, including the regular parameters and an EIP712Signature struct.
     */
    function setDefaultProfileWithSig(DataTypes.SetDefaultProfileWithSigData calldata vars)
        external;

    /**
     * @notice Sets a profile's follow module, must be called by the profile owner.
     *
     * @param profileId The token ID of the profile to set the follow module for.
     * @param followModule The follow module to set for the given profile, must be whitelisted.
     * @param followModuleInitData The data to be passed to the follow module for initialization.
     */
    function setFollowModule(
        uint256 profileId,
        address followModule,
        bytes calldata followModuleInitData
    ) external;

    /**
     * @notice Sets a profile's follow module via signature with the specified parameters.
     *
     * @param vars A SetFollowModuleWithSigData struct, including the regular parameters and an EIP712Signature struct.
     */
    function setFollowModuleWithSig(DataTypes.SetFollowModuleWithSigData calldata vars) external;

    /**
     * @notice Sets a profile's dispatcher, giving that dispatcher rights to publish to that profile.
     *
     * @param profileId The token ID of the profile of the profile to set the dispatcher for.
     * @param dispatcher The dispatcher address to set for the given profile ID.
     */
    function setDispatcher(uint256 profileId, address dispatcher) external;

    /**
     * @notice Sets a profile's dispatcher via signature with the specified parameters.
     *
     * @param vars A SetDispatcherWithSigData struct, including the regular parameters and an EIP712Signature struct.
     */
    function setDispatcherWithSig(DataTypes.SetDispatcherWithSigData calldata vars) external;

    /**
     * @notice Sets a profile's URI, which is reflected in the `tokenURI()` function.
     *
     * @param profileId The token ID of the profile of the profile to set the URI for.
     * @param imageURI The URI to set for the given profile.
     */
    function setProfileImageURI(uint256 profileId, string calldata imageURI) external;

    /**
     * @notice Sets a profile's URI via signature with the specified parameters.
     *
     * @param vars A SetProfileImageURIWithSigData struct, including the regular parameters and an EIP712Signature struct.
     */
    function setProfileImageURIWithSig(DataTypes.SetProfileImageURIWithSigData calldata vars)
        external;

    /**
     * @notice Sets a followNFT URI for a given profile's follow NFT.
     *
     * @param profileId The token ID of the profile for which to set the followNFT URI.
     * @param followNFTURI The follow NFT URI to set.
     */
    function setFollowNFTURI(uint256 profileId, string calldata followNFTURI) external;

    /**
     * @notice Sets a followNFT URI via signature with the specified parameters.
     *
     * @param vars A SetFollowNFTURIWithSigData struct, including the regular parameters and an EIP712Signature struct.
     */
    function setFollowNFTURIWithSig(DataTypes.SetFollowNFTURIWithSigData calldata vars) external;

    /**
     * @notice Publishes a post to a given profile, must be called by the profile owner.
     *
     * @param vars A PostData struct containing the needed parameters.
     *
     * @return uint256 An integer representing the post's publication ID.
     */
    function post(DataTypes.PostData calldata vars) external returns (uint256);

    /**
     * @notice Publishes a post to a given profile via signature with the specified parameters.
     *
     * @param vars A PostWithSigData struct containing the regular parameters and an EIP712Signature struct.
     *
     * @return uint256 An integer representing the post's publication ID.
     */
    function postWithSig(DataTypes.PostWithSigData calldata vars) external returns (uint256);

    /**
     * @notice Publishes a comment to a given profile, must be called by the profile owner.
     *
     * @param vars A CommentData struct containing the needed parameters.
     *
     * @return uint256 An integer representing the comment's publication ID.
     */
    function comment(DataTypes.CommentData calldata vars) external returns (uint256);

    /**
     * @notice Publishes a comment to a given profile via signature with the specified parameters.
     *
     * @param vars A CommentWithSigData struct containing the regular parameters and an EIP712Signature struct.
     *
     * @return uint256 An integer representing the comment's publication ID.
     */
    function commentWithSig(DataTypes.CommentWithSigData calldata vars) external returns (uint256);

    /**
     * @notice Publishes a mirror to a given profile, must be called by the profile owner.
     *
     * @param vars A MirrorData struct containing the necessary parameters.
     *
     * @return uint256 An integer representing the mirror's publication ID.
     */
    function mirror(DataTypes.MirrorData calldata vars) external returns (uint256);

    /**
     * @notice Publishes a mirror to a given profile via signature with the specified parameters.
     *
     * @param vars A MirrorWithSigData struct containing the regular parameters and an EIP712Signature struct.
     *
     * @return uint256 An integer representing the mirror's publication ID.
     */
    function mirrorWithSig(DataTypes.MirrorWithSigData calldata vars) external returns (uint256);

    /**
     * @notice Follows the given profiles, executing each profile's follow module logic (if any) and minting followNFTs to the caller.
     *
     * NOTE: Both the `profileIds` and `datas` arrays must be of the same length, regardless if the profiles do not have a follow module set.
     *
     * @param profileIds The token ID array of the profiles to follow.
     * @param datas The arbitrary data array to pass to the follow module for each profile if needed.
     *
     * @return uint256[] An array of integers representing the minted follow NFTs token IDs.
     */
    function follow(uint256[] calldata profileIds, bytes[] calldata datas)
        external
        returns (uint256[] memory);

    /**
     * @notice Follows a given profile via signature with the specified parameters.
     *
     * @param vars A FollowWithSigData struct containing the regular parameters as well as the signing follower's address
     * and an EIP712Signature struct.
     *
     * @return uint256[] An array of integers representing the minted follow NFTs token IDs.
     */
    function followWithSig(DataTypes.FollowWithSigData calldata vars)
        external
        returns (uint256[] memory);

    /**
     * @notice Collects a given publication, executing collect module logic and minting a collectNFT to the caller.
     *
     * @param profileId The token ID of the profile that published the publication to collect.
     * @param pubId The publication to collect's publication ID.
     * @param data The arbitrary data to pass to the collect module if needed.
     *
     * @return uint256 An integer representing the minted token ID.
     */
    function collect(
        uint256 profileId,
        uint256 pubId,
        bytes calldata data
    ) external returns (uint256);

    /**
     * @notice Collects a given publication via signature with the specified parameters.
     *
     * @param vars A CollectWithSigData struct containing the regular parameters as well as the collector's address and
     * an EIP712Signature struct.
     *
     * @return uint256 An integer representing the minted token ID.
     */
    function collectWithSig(DataTypes.CollectWithSigData calldata vars) external returns (uint256);

    /**
     * @dev Helper function to emit a detailed followNFT transfer event from the hub, to be consumed by frontends to track
     * followNFT transfers.
     *
     * @param profileId The token ID of the profile associated with the followNFT being transferred.
     * @param followNFTId The followNFT being transferred's token ID.
     * @param from The address the followNFT is being transferred from.
     * @param to The address the followNFT is being transferred to.
     */
    function emitFollowNFTTransferEvent(
        uint256 profileId,
        uint256 followNFTId,
        address from,
        address to
    ) external;

    /**
     * @dev Helper function to emit a detailed collectNFT transfer event from the hub, to be consumed by frontends to track
     * collectNFT transfers.
     *
     * @param profileId The token ID of the profile associated with the collect NFT being transferred.
     * @param pubId The publication ID associated with the collect NFT being transferred.
     * @param collectNFTId The collectNFT being transferred's token ID.
     * @param from The address the collectNFT is being transferred from.
     * @param to The address the collectNFT is being transferred to.
     */
    function emitCollectNFTTransferEvent(
        uint256 profileId,
        uint256 pubId,
        uint256 collectNFTId,
        address from,
        address to
    ) external;

    /// ************************
    /// *****VIEW FUNCTIONS*****
    /// ************************

    /**
     * @notice Returns whether or not a profile creator is whitelisted.
     *
     * @param profileCreator The address of the profile creator to check.
     *
     * @return bool True if the profile creator is whitelisted, false otherwise.
     */
    function isProfileCreatorWhitelisted(address profileCreator) external view returns (bool);

    /**
     * @notice Returns default profile for a given wallet address
     *
     * @param wallet The address to find the default mapping
     *
     * @return uint256 The default profile id, which will be 0 if not mapped.
     */
    function defaultProfile(address wallet) external view returns (uint256);

    /**
     * @notice Returns whether or not a follow module is whitelisted.
     *
     * @param followModule The address of the follow module to check.
     *
     * @return bool True if the the follow module is whitelisted, false otherwise.
     */
    function isFollowModuleWhitelisted(address followModule) external view returns (bool);

    /**
     * @notice Returns whether or not a reference module is whitelisted.
     *
     * @param referenceModule The address of the reference module to check.
     *
     * @return bool True if the the reference module is whitelisted, false otherwise.
     */
    function isReferenceModuleWhitelisted(address referenceModule) external view returns (bool);

    /**
     * @notice Returns whether or not a collect module is whitelisted.
     *
     * @param collectModule The address of the collect module to check.
     *
     * @return bool True if the the collect module is whitelisted, false otherwise.
     */
    function isCollectModuleWhitelisted(address collectModule) external view returns (bool);

    /**
     * @notice Returns the currently configured governance address.
     *
     * @return address The address of the currently configured governance.
     */
    function getGovernance() external view returns (address);

    /**
     * @notice Returns the dispatcher associated with a profile.
     *
     * @param profileId The token ID of the profile to query the dispatcher for.
     *
     * @return address The dispatcher address associated with the profile.
     */
    function getDispatcher(uint256 profileId) external view returns (address);

    /**
     * @notice Returns the publication count for a given profile.
     *
     * @param profileId The token ID of the profile to query.
     *
     * @return uint256 The number of publications associated with the queried profile.
     */
    function getPubCount(uint256 profileId) external view returns (uint256);

    /**
     * @notice Returns the followNFT associated with a given profile, if any.
     *
     * @param profileId The token ID of the profile to query the followNFT for.
     *
     * @return address The followNFT associated with the given profile.
     */
    function getFollowNFT(uint256 profileId) external view returns (address);

    /**
     * @notice Returns the followNFT URI associated with a given profile.
     *
     * @param profileId The token ID of the profile to query the followNFT URI for.
     *
     * @return string The followNFT URI associated with the given profile.
     */
    function getFollowNFTURI(uint256 profileId) external view returns (string memory);

    /**
     * @notice Returns the collectNFT associated with a given publication, if any.
     *
     * @param profileId The token ID of the profile that published the publication to query.
     * @param pubId The publication ID of the publication to query.
     *
     * @return address The address of the collectNFT associated with the queried publication.
     */
    function getCollectNFT(uint256 profileId, uint256 pubId) external view returns (address);

    /**
     * @notice Returns the follow module associated witha  given profile, if any.
     *
     * @param profileId The token ID of the profile to query the follow module for.
     *
     * @return address The address of the follow module associated with the given profile.
     */
    function getFollowModule(uint256 profileId) external view returns (address);

    /**
     * @notice Returns the collect module associated with a given publication.
     *
     * @param profileId The token ID of the profile that published the publication to query.
     * @param pubId The publication ID of the publication to query.
     *
     * @return address The address of the collect module associated with the queried publication.
     */
    function getCollectModule(uint256 profileId, uint256 pubId) external view returns (address);

    /**
     * @notice Returns the reference module associated witha  given profile, if any.
     *
     * @param profileId The token ID of the profile that published the publication to querythe reference module for.
     * @param pubId The publication ID of the publication to query the reference module for.
     *
     * @return address The address of the reference module associated with the given profile.
     */
    function getReferenceModule(uint256 profileId, uint256 pubId) external view returns (address);

    /**
     * @notice Returns the handle associated with a profile.
     *
     * @param profileId The token ID of the profile to query the handle for.
     *
     * @return string The handle associated with the profile.
     */
    function getHandle(uint256 profileId) external view returns (string memory);

    /**
     * @notice Returns the publication pointer (profileId & pubId) associated with a given publication.
     *
     * @param profileId The token ID of the profile that published the publication to query the pointer for.
     * @param pubId The publication ID of the publication to query the pointer for.
     *
     * @return tuple First, the profile ID of the profile the current publication is pointing to, second, the
     * publication ID of the publication the current publication is pointing to.
     */
    function getPubPointer(uint256 profileId, uint256 pubId)
        external
        view
        returns (uint256, uint256);

    /**
     * @notice Returns the URI associated with a given publication.
     *
     * @param profileId The token ID of the profile that published the publication to query.
     * @param pubId The publication ID of the publication to query.
     *
     * @return string The URI associated with a given publication.
     */
    function getContentURI(uint256 profileId, uint256 pubId) external view returns (string memory);

    /**
     * @notice Returns the profile token ID according to a given handle.
     *
     * @param handle The handle to resolve the profile token ID with.
     *
     * @return uint256 The profile ID the passed handle points to.
     */
    function getProfileIdByHandle(string calldata handle) external view returns (uint256);

    /**
     * @notice Returns the full profile struct associated with a given profile token ID.
     *
     * @param profileId The token ID of the profile to query.
     *
     * @return ProfileStruct The profile struct of the given profile.
     */
    function getProfile(uint256 profileId) external view returns (DataTypes.ProfileStruct memory);

    /**
     * @notice Returns the full publication struct for a given publication.
     *
     * @param profileId The token ID of the profile that published the publication to query.
     * @param pubId The publication ID of the publication to query.
     *
     * @return PublicationStruct The publication struct associated with the queried publication.
     */
    function getPub(uint256 profileId, uint256 pubId)
        external
        view
        returns (DataTypes.PublicationStruct memory);

    /**
     * @notice Returns the publication type associated with a given publication.
     *
     * @param profileId The token ID of the profile that published the publication to query.
     * @param pubId The publication ID of the publication to query.
     *
     * @return PubType The publication type, as a member of an enum (either "post," "comment" or "mirror").
     */
    function getPubType(uint256 profileId, uint256 pubId) external view returns (DataTypes.PubType);

    /**
     * @notice Returns the follow NFT implementation address.
     *
     * @return address The follow NFT implementation address.
     */
    function getFollowNFTImpl() external view returns (address);

    /**
     * @notice Returns the collect NFT implementation address.
     *
     * @return address The collect NFT implementation address.
     */
    function getCollectNFTImpl() external view returns (address);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/introspection/IERC165.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * https://eips.ethereum.org/EIPS/eip-165[EIP].
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others ({ERC165Checker}).
 *
 * For an implementation, see {ERC165}.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified[EIP section]
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.5.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

{
  "optimizer": {
    "enabled": true,
    "runs": 200,
    "details": {
      "yul": true
    }
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "libraries": {}
}

[{"inputs":[{"internalType":"address","name":"hub","type":"address"},{"internalType":"address","name":"moduleGlobals","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"CollectExpired","type":"error"},{"inputs":[],"name":"FollowInvalid","type":"error"},{"inputs":[],"name":"InitParamsInvalid","type":"error"},{"inputs":[],"name":"MintLimitExceeded","type":"error"},{"inputs":[],"name":"ModuleDataMismatch","type":"error"},{"inputs":[],"name":"NotHub","type":"error"},{"inputs":[],"name":"HUB","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"MODULE_GLOBALS","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"profileId","type":"uint256"},{"internalType":"uint256","name":"pubId","type":"uint256"}],"name":"getPublicationData","outputs":[{"components":[{"internalType":"uint256","name":"collectLimit","type":"uint256"},{"internalType":"uint256","name":"currentCollects","type":"uint256"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"currency","type":"address"},{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint16","name":"referralFee","type":"uint16"},{"internalType":"bool","name":"followerOnly","type":"bool"},{"internalType":"uint40","name":"endTimestamp","type":"uint40"}],"internalType":"struct ProfilePublicationData","name":"","type":"tuple"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"profileId","type":"uint256"},{"internalType":"uint256","name":"pubId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"initializePublicationCollectModule","outputs":[{"internalType":"bytes","name":"","type":"bytes"}],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"referrerProfileId","type":"uint256"},{"internalType":"address","name":"collector","type":"address"},{"internalType":"uint256","name":"profileId","type":"uint256"},{"internalType":"uint256","name":"pubId","type":"uint256"},{"internalType":"bytes","name":"data","type":"bytes"}],"name":"processCollect","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

00000000000000000000000060ae865ee4c725cd04353b5aab364553f56cef820000000000000000000000001353aadfe5fed85382826757a95de908bd21c4f9

-----Decoded View---------------
Arg [0] : hub (address): 0x60ae865ee4c725cd04353b5aab364553f56cef82
Arg [1] : moduleGlobals (address): 0x1353aadfe5fed85382826757a95de908bd21c4f9

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 00000000000000000000000060ae865ee4c725cd04353b5aab364553f56cef82
Arg [1] : 0000000000000000000000001353aadfe5fed85382826757a95de908bd21c4f9