Contract 0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d

Contract Overview

Balance:
0 MATIC

Token:
Txn Hash Method
Block
From
To
Value [Txn Fee]
0xe700820b2789f073869e32151ca92a3ccc197265bb227bf7bad3f283d6db3a7eDeposit194655702021-09-27 15:17:2822 days 12 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0x582442435a273880db6b1865fe5e18964dc6a365c3f5991843956e0b65944c8fDeposit194655592021-09-27 15:17:0622 days 12 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0xa378cbb1b172baa13fe5946d24e1448bf6a2569c037a447cb8ea2c583da5659aDeposit194654182021-09-27 15:12:1622 days 12 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0xa3c3ef1480f30698ba12194a5d20795f20443b217aa216eb291e3d0038007047Deposit194654082021-09-27 15:11:5622 days 12 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0xad84c8edc3299af1527c3afb19ccccc4888c344e93aae27f5e9975a3a27bfdfbDeposit194653662021-09-27 15:10:2822 days 12 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0x1c39b9f4c59fdf4f879a2e4439aeb115a9d8a1b88308e0f32ba4defdf4539361Deposit194652892021-09-27 15:07:5022 days 12 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0x03adb2710e56f5cd4a716339c9130460e856c218a16e2b54381d5778d477f25eDeposit194633362021-09-27 14:00:4022 days 13 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0x80845f63cb13e1f0f45bb3bc3aaa5da0a13e25e9c38686bf8c14624557d65e24Deposit194626062021-09-27 13:35:3622 days 14 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0x257f9b3904fe308e31a042ca95a04fc93f2fa2deb65988fb3209ff3c4bdcb1f6Deposit194624832021-09-27 13:31:2222 days 14 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0x3927473f005b2522419e3bce7fa1eda30fe8b7499d0b46d0e39203eea7dd0e6eDeposit194622252021-09-27 13:22:3022 days 14 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0x6be582ce1d66d3782a52e55b2db1064faf635f86386b9d908e21ffcdc65e75daDeposit191646602021-09-20 10:23:4829 days 17 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0x7df34fa6e69ce524368ed94235301598140a402a398cac4451cb426ff55b9107Deposit190382982021-09-17 9:46:3232 days 17 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0xe1ba1178e3bbf6b8f78d007e4c637a403c014116a01a93ed93fa0bbfaab7a19dDeposit190030882021-09-16 13:36:1233 days 14 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0xbb59001cac1c23798d540cf74370f696437f7a8bb5f607937345fd521995128fDeposit189538422021-09-15 9:14:4834 days 18 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.00028113
0xabb14c6db3c90d574d833941db3893b5d67d62d8637100d3116b7a909af623ccDeposit189264102021-09-14 17:31:5235 days 10 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.0003746
0x38a7ad092da5201b56c302b129aa79e4a39f2e61556900c23f00a3cbb3fd4dc6Deposit189259062021-09-14 17:14:3235 days 10 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.0017915
0x1180e85f0992c61c91502e2c6abeea2a2e77dee293df3d9be7069015d7c188a8Set Pool Filter189257752021-09-14 17:10:0235 days 10 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  0x0be9adeb7c6a6719975f1f260fdc811aa0b13c0d0 MATIC0.000050941
0x972ba9d5cdb1345d2e00924a270f46ae8068c7b009d580fdabd8f067cd61b8590x60806040187577612021-09-10 16:36:2339 days 11 hrs ago0x7262a4e14ced289795097deaf32c845cabad2403 IN  Contract Creation0 MATIC0.000394088
[ Download CSV Export 
Parent Txn Hash Block From To Value
Loading

Contract Source Code Verified (Similar Match)
Note: This contract matches the deployed ByteCode of the Source Code for Contract 0x8f4332b766521c41354B951AdE76dFEA32854217

Contract Name:
UUPSProxy

Compiler Version
v0.8.4+commit.c7e474f2

Optimization Enabled:
Yes with 20000 runs

Other Settings:
default evmVersion, Unlicense license
File 1 of 7 : ERC1967Proxy.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

import "../Proxy.sol";
import "./ERC1967Upgrade.sol";

/**
 * @dev This contract implements an upgradeable proxy. It is upgradeable because calls are delegated to an
 * implementation address that can be changed. This address is stored in storage in the location specified by
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967], so that it doesn't conflict with the storage layout of the
 * implementation behind the proxy.
 */
contract ERC1967Proxy is Proxy, ERC1967Upgrade {
    /**
     * @dev Initializes the upgradeable proxy with an initial implementation specified by `_logic`.
     *
     * If `_data` is nonempty, it's used as data in a delegate call to `_logic`. This will typically be an encoded
     * function call, and allows initializating the storage of the proxy like a Solidity constructor.
     */
    constructor(address _logic, bytes memory _data) payable {
        assert(_IMPLEMENTATION_SLOT == bytes32(uint256(keccak256("eip1967.proxy.implementation")) - 1));
        _upgradeToAndCall(_logic, _data, false);
    }

    /**
     * @dev Returns the current implementation address.
     */
    function _implementation() internal view virtual override returns (address impl) {
        return ERC1967Upgrade._getImplementation();
    }
}

File 2 of 7 : ERC1967Upgrade.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.8.2;

import "../beacon/IBeacon.sol";
import "../../utils/Address.sol";
import "../../utils/StorageSlot.sol";

/**
 * @dev This abstract contract provides getters and event emitting update functions for
 * https://eips.ethereum.org/EIPS/eip-1967[EIP1967] slots.
 *
 * _Available since v4.1._
 *
 * @custom:oz-upgrades-unsafe-allow delegatecall
 */
abstract contract ERC1967Upgrade {
    // This is the keccak-256 hash of "eip1967.proxy.rollback" subtracted by 1
    bytes32 private constant _ROLLBACK_SLOT = 0x4910fdfa16fed3260ed0e7147f7cc6da11a60208b5b9406d12a635614ffd9143;

    /**
     * @dev Storage slot with the address of the current implementation.
     * This is the keccak-256 hash of "eip1967.proxy.implementation" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;

    /**
     * @dev Emitted when the implementation is upgraded.
     */
    event Upgraded(address indexed implementation);

    /**
     * @dev Returns the current implementation address.
     */
    function _getImplementation() internal view returns (address) {
        return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 implementation slot.
     */
    function _setImplementation(address newImplementation) private {
        require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
        StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
    }

    /**
     * @dev Perform implementation upgrade
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeTo(address newImplementation) internal {
        _setImplementation(newImplementation);
        emit Upgraded(newImplementation);
    }

    /**
     * @dev Perform implementation upgrade with additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCall(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        _upgradeTo(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }
    }

    /**
     * @dev Perform implementation upgrade with security checks for UUPS proxies, and additional setup call.
     *
     * Emits an {Upgraded} event.
     */
    function _upgradeToAndCallSecure(
        address newImplementation,
        bytes memory data,
        bool forceCall
    ) internal {
        address oldImplementation = _getImplementation();

        // Initial upgrade and setup call
        _setImplementation(newImplementation);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(newImplementation, data);
        }

        // Perform rollback test if not already in progress
        StorageSlot.BooleanSlot storage rollbackTesting = StorageSlot.getBooleanSlot(_ROLLBACK_SLOT);
        if (!rollbackTesting.value) {
            // Trigger rollback using upgradeTo from the new implementation
            rollbackTesting.value = true;
            Address.functionDelegateCall(
                newImplementation,
                abi.encodeWithSignature("upgradeTo(address)", oldImplementation)
            );
            rollbackTesting.value = false;
            // Check rollback was effective
            require(oldImplementation == _getImplementation(), "ERC1967Upgrade: upgrade breaks further upgrades");
            // Finally reset to the new implementation and log the upgrade
            _upgradeTo(newImplementation);
        }
    }

    /**
     * @dev Storage slot with the admin of the contract.
     * This is the keccak-256 hash of "eip1967.proxy.admin" subtracted by 1, and is
     * validated in the constructor.
     */
    bytes32 internal constant _ADMIN_SLOT = 0xb53127684a568b3173ae13b9f8a6016e243e63b6e8ee1178d6a717850b5d6103;

    /**
     * @dev Emitted when the admin account has changed.
     */
    event AdminChanged(address previousAdmin, address newAdmin);

    /**
     * @dev Returns the current admin.
     */
    function _getAdmin() internal view returns (address) {
        return StorageSlot.getAddressSlot(_ADMIN_SLOT).value;
    }

    /**
     * @dev Stores a new address in the EIP1967 admin slot.
     */
    function _setAdmin(address newAdmin) private {
        require(newAdmin != address(0), "ERC1967: new admin is the zero address");
        StorageSlot.getAddressSlot(_ADMIN_SLOT).value = newAdmin;
    }

    /**
     * @dev Changes the admin of the proxy.
     *
     * Emits an {AdminChanged} event.
     */
    function _changeAdmin(address newAdmin) internal {
        emit AdminChanged(_getAdmin(), newAdmin);
        _setAdmin(newAdmin);
    }

    /**
     * @dev The storage slot of the UpgradeableBeacon contract which defines the implementation for this proxy.
     * This is bytes32(uint256(keccak256('eip1967.proxy.beacon')) - 1)) and is validated in the constructor.
     */
    bytes32 internal constant _BEACON_SLOT = 0xa3f0ad74e5423aebfd80d3ef4346578335a9a72aeaee59ff6cb3582b35133d50;

    /**
     * @dev Emitted when the beacon is upgraded.
     */
    event BeaconUpgraded(address indexed beacon);

    /**
     * @dev Returns the current beacon.
     */
    function _getBeacon() internal view returns (address) {
        return StorageSlot.getAddressSlot(_BEACON_SLOT).value;
    }

    /**
     * @dev Stores a new beacon in the EIP1967 beacon slot.
     */
    function _setBeacon(address newBeacon) private {
        require(Address.isContract(newBeacon), "ERC1967: new beacon is not a contract");
        require(
            Address.isContract(IBeacon(newBeacon).implementation()),
            "ERC1967: beacon implementation is not a contract"
        );
        StorageSlot.getAddressSlot(_BEACON_SLOT).value = newBeacon;
    }

    /**
     * @dev Perform beacon upgrade with additional setup call. Note: This upgrades the address of the beacon, it does
     * not upgrade the implementation contained in the beacon (see {UpgradeableBeacon-_setImplementation} for that).
     *
     * Emits a {BeaconUpgraded} event.
     */
    function _upgradeBeaconToAndCall(
        address newBeacon,
        bytes memory data,
        bool forceCall
    ) internal {
        _setBeacon(newBeacon);
        emit BeaconUpgraded(newBeacon);
        if (data.length > 0 || forceCall) {
            Address.functionDelegateCall(IBeacon(newBeacon).implementation(), data);
        }
    }
}

File 3 of 7 : Proxy.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev This abstract contract provides a fallback function that delegates all calls to another contract using the EVM
 * instruction `delegatecall`. We refer to the second contract as the _implementation_ behind the proxy, and it has to
 * be specified by overriding the virtual {_implementation} function.
 *
 * Additionally, delegation to the implementation can be triggered manually through the {_fallback} function, or to a
 * different contract through the {_delegate} function.
 *
 * The success and return data of the delegated call will be returned back to the caller of the proxy.
 */
abstract contract Proxy {
    /**
     * @dev Delegates the current call to `implementation`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _delegate(address implementation) internal virtual {
        assembly {
            // Copy msg.data. We take full control of memory in this inline assembly
            // block because it will not return to Solidity code. We overwrite the
            // Solidity scratch pad at memory position 0.
            calldatacopy(0, 0, calldatasize())

            // Call the implementation.
            // out and outsize are 0 because we don't know the size yet.
            let result := delegatecall(gas(), implementation, 0, calldatasize(), 0, 0)

            // Copy the returned data.
            returndatacopy(0, 0, returndatasize())

            switch result
            // delegatecall returns 0 on error.
            case 0 {
                revert(0, returndatasize())
            }
            default {
                return(0, returndatasize())
            }
        }
    }

    /**
     * @dev This is a virtual function that should be overriden so it returns the address to which the fallback function
     * and {_fallback} should delegate.
     */
    function _implementation() internal view virtual returns (address);

    /**
     * @dev Delegates the current call to the address returned by `_implementation()`.
     *
     * This function does not return to its internall call site, it will return directly to the external caller.
     */
    function _fallback() internal virtual {
        _beforeFallback();
        _delegate(_implementation());
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if no other
     * function in the contract matches the call data.
     */
    fallback() external payable virtual {
        _fallback();
    }

    /**
     * @dev Fallback function that delegates calls to the address returned by `_implementation()`. Will run if call data
     * is empty.
     */
    receive() external payable virtual {
        _fallback();
    }

    /**
     * @dev Hook that is called before falling back to the implementation. Can happen as part of a manual `_fallback`
     * call, or as part of the Solidity `fallback` or `receive` functions.
     *
     * If overriden should call `super._beforeFallback()`.
     */
    function _beforeFallback() internal virtual {}
}

File 4 of 7 : IBeacon.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev This is the interface that {BeaconProxy} expects of its beacon.
 */
interface IBeacon {
    /**
     * @dev Must return an address that can be used as a delegate call target.
     *
     * {BeaconProxy} will check that this address is a contract.
     */
    function implementation() external view returns (address);
}

File 5 of 7 : Address.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) private pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

File 6 of 7 : StorageSlot.sol
// SPDX-License-Identifier: MIT

pragma solidity ^0.8.0;

/**
 * @dev Library for reading and writing primitive types to specific storage slots.
 *
 * Storage slots are often used to avoid storage conflict when dealing with upgradeable contracts.
 * This library helps with reading and writing to such slots without the need for inline assembly.
 *
 * The functions in this library return Slot structs that contain a `value` member that can be used to read or write.
 *
 * Example usage to set ERC1967 implementation slot:
 * ```
 * contract ERC1967 {
 *     bytes32 internal constant _IMPLEMENTATION_SLOT = 0x360894a13ba1a3210667c828492db98dca3e2076cc3735a920a3ca505d382bbc;
 *
 *     function _getImplementation() internal view returns (address) {
 *         return StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value;
 *     }
 *
 *     function _setImplementation(address newImplementation) internal {
 *         require(Address.isContract(newImplementation), "ERC1967: new implementation is not a contract");
 *         StorageSlot.getAddressSlot(_IMPLEMENTATION_SLOT).value = newImplementation;
 *     }
 * }
 * ```
 *
 * _Available since v4.1 for `address`, `bool`, `bytes32`, and `uint256`._
 */
library StorageSlot {
    struct AddressSlot {
        address value;
    }

    struct BooleanSlot {
        bool value;
    }

    struct Bytes32Slot {
        bytes32 value;
    }

    struct Uint256Slot {
        uint256 value;
    }

    /**
     * @dev Returns an `AddressSlot` with member `value` located at `slot`.
     */
    function getAddressSlot(bytes32 slot) internal pure returns (AddressSlot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `BooleanSlot` with member `value` located at `slot`.
     */
    function getBooleanSlot(bytes32 slot) internal pure returns (BooleanSlot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Bytes32Slot` with member `value` located at `slot`.
     */
    function getBytes32Slot(bytes32 slot) internal pure returns (Bytes32Slot storage r) {
        assembly {
            r.slot := slot
        }
    }

    /**
     * @dev Returns an `Uint256Slot` with member `value` located at `slot`.
     */
    function getUint256Slot(bytes32 slot) internal pure returns (Uint256Slot storage r) {
        assembly {
            r.slot := slot
        }
    }
}

File 7 of 7 : UUPSProxy.sol
// SPDX-FileCopyrightText: 2021 Toucan Labs
//
// SPDX-License-Identifier: UNLICENSED

pragma solidity ^0.8.0;

import '@openzeppelin/contracts/proxy/ERC1967/ERC1967Proxy.sol';

// Kept for backwards compatibility with older versions of Hardhat and Truffle plugins.
contract UUPSProxy is ERC1967Proxy {
    constructor(
        address _logic,
        address, // This is completely unused by the uups proxy, required to remain compatible with hardhat deploy: https://github.com/wighawag/hardhat-deploy/issues/146
        bytes memory _data
    ) payable ERC1967Proxy(_logic, _data) {}
}

Settings
{
  "evmVersion": "istanbul",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 20000
  },
  "remappings": [],
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

Contract ABI

[{"inputs":[{"internalType":"address","name":"_logic","type":"address"},{"internalType":"address","name":"","type":"address"},{"internalType":"bytes","name":"_data","type":"bytes"}],"stateMutability":"payable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"address","name":"previousAdmin","type":"address"},{"indexed":false,"internalType":"address","name":"newAdmin","type":"address"}],"name":"AdminChanged","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"beacon","type":"address"}],"name":"BeaconUpgraded","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"implementation","type":"address"}],"name":"Upgraded","type":"event"},{"stateMutability":"payable","type":"fallback"},{"stateMutability":"payable","type":"receive"}]

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

Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading